System Settings; Setting Startup Status (Startup Setting) - Panasonic PV500 User Manual

6.2 System Settings

6.2.1 Setting Startup Status (Startup Setting)

From this menu, you can specify product type to call up at startup of PV500 and display contents (layout).
When you read up the setting data from the storage space of PV500 or a SD memory card, Type and Layout
you specified with this menu are called up.
To specify the setting data (Type 0-255) to read from the storage space in PV500 at startup, select [TOOL] >
[General]. Refer to page 345 for details.
Select Layout at Startup
Select a layout as a startup in RUN menu from the registered layout number.
If the specified layout No. does not exist, the window is displayed in the default layout (same as the preset
layout No.0). At that time, the current layout number displayed on the screen appears as "--".
For details about adjustment or registration of layouts, refer to Chapter 5.3, page 319.
1
. Select "Startup Setting" in "System Settings"
setting window.
2
. Set "Layout No.".
Last Layout No.:
Selected Layout No. (default):
3
. Select "Select Layout No." (default: 0).
The list of layout number is displayed.
4
. Select a desired layout No.
5
. Press the CANCEL key.
The last layout number is held by using the backup battery on the back of PV500. When the battery runs out or
no battery is installed, the layout number 00 is read. If the layout number 00 is not set, the preset layout number
0 is read.
Reads the layout again selected right before turning off the power. The
setting is done if you select this.
Reads the layout No. specified after.
331