Panasonic PV500 User Manual page 143

How to exclude from inspection (Mask area)
Mask areas, where checker does no inspection, can be set in an inspection area.
For Flaw Detection, set a first cell and an end cell of the range to be excluded from inspection. The number of
mask areas is not limited.
Adding a Mask Area
1
. Select "Add Mask".
The border of the first cell from the start point is
displayed in yellow.
2
. Select the start cell of the mask area.
3
. Move the cursor to the end cell of the mask area.
The borders of the cells from start to end in the mask
area are displayed in yellow.
4
. On the end cell, press the ENTER key.
The mask area you have set is displayed in blue.
Deleting a Mask Area
1.
Select "Delete Mask".
The border of the first cell from the start point is displayed
in yellow.
2.
Select the start cell of the mask area to delete.
3
. Move the cursor to the end cell of the mask area.
The borders of the cells from start to end in the mask area
are displayed in yellow.
4
. On the end cell, press the ENTER key.
The mask area is cancelled and the borders of the cells of
the area are displayed in green.
141