Panasonic PV500 User Manual page 262

Slanted Rectangle
Specify the center coordinate, width, height and rotation angle to draw a slanted rectangle. For details of
selectable items, see page 266.
Setting Size of Rectangle, Rotation Angle and Display Position
Specifying Center Coordinate
1.
Select the table on the setting window of Slanted rectangle, and
move the cursor onto "Center X" and press the ENTER key.
A list of available items is displayed. (The checkers displayed in gray
indicates that they are not unset.)
2.
Select the item to input in Center X from the list of the selectable
items.
When selecting "Cursor", move the cross mark displayed on the
screen window and press the ENTER key.
About the items that X and Y-coordinates are input together (page
257)
3.
In the same way, set Center Y.
Specifying Width and Height
4.
Move the cursor onto "Width" and press the ENTER key.
A list of available items is displayed.
5.
Select the item to input in Width from the list of the selectable
items.
6.
In the same way, set Height.
260