Panasonic PV500 User Manual page 127

1.
Select "ENVIRONMENT" > "System
Settings" from the menu bar.
2.
Select "Operation".
3.
Select "Common" for "Template
Registration".
If templates have already created at this
moment, the templates will be registered as
common templates automatically.
Note on resetting to "Per Checker"
When you operate to reset to "Per Checker" from the menu or initialize environment settings, an error message
may appear and "Common" setting may be held. This is because of the reason described below.
Changing the setting from "Common" to "Per Checker" copies the common templates that are used by
checkers to each checker. In "Per Checker" setting, total number of templates is likely to be increased because
each checker holds a template separately even for the same image, while multiple checkers use a single
template in "Common" setting.
For example, the total number of templates is five in the figure at the previous page. After copying the
templates to each checker, the total number is seven as the figure below which is increased by two.
You cannot reset to "Per Checker" when inadequate memory of PV500 or excessive number of registration
prevents copying the templates.
Note that the other settings are initialized even when "Template Registration" remains "Common" due to the
above reasons after initializing environment settings.
Creating a New Common Template
1.
Select a template No. in template setting window and then select "Register".
2.
Select a blank field for common
templates.
When selecting a registered template, you
can update or delete the image pattern.
3.
Select "Register" for "Common Template
Setting".
Template setting window is displayed.
Select a shape and set a template area.
Refer to page 122 for details.
To delete the selected template, select
"Delete".
125