Panasonic PV500 User Manual page 403

Reinspection
(Executes inspection without capturing an image)
For "Execute All" or "Automatic Switch" execution mode
Send % R
Receive % R $
Error (ERROR 0 signal = ON)
% R
Error code
200
202
203
204
For "User-Defined" execution mode
% R ?
Send
Receive % R $
Error (ERROR 0 signal = ON)
% R
Error code
200
201
202
203
204
Example: Starts the inspection of block No.0.
Send
Receive
BCC = 77 or **
BCC CR
BCC(53) CR
! Error code (3-digit)
Operation is stopped
Execution mode is "User-Defined".
There is no image captured.
Reinspection cannot be executed because PV500 is inspecting repeatedly
BCC CR
BCC(53) CR
! Error code (3-digit)
Operation is stopped
Execution mode is NOT "User-Defined".
The specified block is invalid. (The number which does not/ cannot exist was
specified.)
There is no image captured.
Reinspection cannot be executed because PV500 is inspecting repeatedly
% R 0 * * CR
% R $ 5 3 CR
BCC CR
? = 0 - 9 (Block No. to execute)
BCC CR
401