Panasonic PV500 User Manual page 251

When Output Condition is "NG Judgment" and Execution Mode is "Automatic
Switch" or "User-Defined"
1.
Select "Condition" in judgement output setting window.
"Condition" setting window is displayed.
2.
Select "Image Output" in the item selecting field on
the upper left.
The list of the Image Output by blocks is displayed.
3.
Select "Condition" column of the block No. to set in the list and select a judgement type.
For details, refer to the procedure of "Execute All" execution mode.
4.
Select "Checker No." column and set a judgement number.
5.
After setting is completed, press the CANCEL key.
Now you completed registering.
In case of automatic switch, as for the image output, only the setting for the block finally executed is
enabled.
For example, if executing the operation in the order of block No. 0 -> block No.1 when the conditions for
the inspection image output have been set for the block No. 0 only, the inspection image is not output as
the conditions for the inspection image output have not been set for the block No. 1 finally executed.
When Image output is "Judge. Per Cam." and Execution Mode is "Execute All"
1.
Select "Condition" in judgement output setting window.
"Condition" setting window is displayed.
2.
Select "Condition" column of Image Output.
Select a judgment type to register.
[No]: Not to output images.
[No Condition]: Always output images
regardless of inspection
results.
[JRC]: Use a JRC (Internal) as a
condition to image output.
[JDC]: Use a JRC (External) as a
condition to image output.
*Select "No Condition" to temporarily output all images regardless of a judgement condition when the
image output condition is set to "NG Judgement" or "Judge. Per Cam." which is on the window of
"Input/Output" of "ENVIRONMENT".
When the other conditions are selected than "NG Judgement" and "Judge. Per Cam.", the setting of
Judgment window is invalid.
(For the setting of "Judge. Per Cam.", refer to page 284.)
3.
Select "Checker No." column and enter a judgment number.
The status of the image output is displayed in the "Result" column.
"No" indicates that image output is not executed because the condition is not fulfilled.
249