Panasonic PV500 User Manual page 325

Optimizing Window Size (Optimize Size)
Adjust the window size so that it displays all cells and no margin. This is optimization.
While you can adjust the window size by modifying the start/end point by "Size", using "Optimize Size" allows
adjusting efficiently in one operation.
1.
Press the FUNC key to display the pop-up menu.
2.
Select "Optimize Size".
The size of the Data R/W window is changed.
Changing Window Transparency (RUN Menu)
The transparence of Data R/W windows can be changed. This is a function that helps to observe images and
other windows when they are displayed overlapping with the window.
Select whether the transmittance set here applies to each Data R/W window or not.
The information of window transparency is not included in the layout information.
1.
Select "VIEW" from the menu bar.
2
. Select "Window Transparency (RUN menu)".
The transparence setting window is displayed. Default
value is 0%. The larger value, the higher transparence.
3.
Select desired transparency.
4
. After setting is completed, press the CANCEL key.
Changing Sequence Order of Windows
When displaying multiple windows, the sequence order can be changed.
Note that Data R/W windows are displayed in front of screen windows and cannot be displayed in behind. The
overlapping order can be arranged only among screen windows or only among Data R/W windows.
To arrange the order, replace the windows back and forth.
For example, replace the first and the second, or the second and the third.
1
. Select "VIEW" > "Window Sequence Order".
The window sequence arranging window is displayed.
2.
Select the window to change the order.
The letters of the selected window are displayed in red.
3.
Select the window to replace its order with the window selected in step 2.
You can select only the replaceable window.
The window of the selected number is displayed in the selecting color in the image display area.
To cancel the adjustment, press the CNACEL key.
323