General Specification - Panasonic PV500 User Manual

11.1 General Specification

PV500
CPU
Number of camera connections
Processing resolution
Processing function
Interface Serial
Parallel input
Parallel output
USB
Ethernet
Memory card
Monitor output
Setting
Rating Voltage
Power
Consumption
Environmental Operating
resistance temperature
range
Operating
humidity range
Noise resistance
Vibration
resistance
Shock resistance
Insulation
resistance (initial)
Voltage
resistance (initial)
Battery life
Weight
436
2-Camera type
32-bit RISC CPU & DSP
Up to 2
Hor. 640 x Ver. 480 pixels (Quad-speed digital camera, Ultra compact
digital camera, 0.3-Mega Compact Gray Camera*1)
Hor. 1600 x Ver. 1200 pixels (2-Mega-pixel digital camera)
Gray Scale: 8 bits, 256 gray scale (Binary: 8 groups/product type and
memory)
Partial imaging: Up to 2 areas can be set.
RS-232C x 1
I/O terminal (Phoenix): Input 14 points,
I/O connector (MIL connector type): Input 32 points.
24V DC, Bi-directional photo coupler
I/O terminal (Phoenix): Output 15 points,
I/O connector (MIL connector type): Output 32 points
NPN output type (N at the end of the product number): 5 to 24 V DC,
Photo coupler output
PNP output type (P at the end of the product number): 5 to 24V DC,
Photo Mos output
For USB2.0, AB type (for PVWIN only)
Ethernet Port x 1
Media: 10-BASE-T / 100BASE-TX / 1000BASE-T, protocol: TCP/IP
(General purpose communication), UDP/IP (PLC communication))
SD memory card slot x1
1ch: XGA (1024 X 768) output
1 ch: For the dedicated keypad
24 V DC Operating voltage range: 21.6 to 26.4 V DC (with ripples)
1.5 A or less
0 to +45 °C (without icing and
dew condensation)
35 to 85% RH (without icing and dew condensation at 25°C)
1000 V pulse width 50 ns/1 µs (a noise simulator was used.)
10 to 55 Hz, one sweep per minute, amplitude 0.75 mm, 30 minutes
each in X/Y/Z direction
2
196m/ s , 5 times each in X, Y and Z directions
100 MΩ or more (500 V DC by insulation resistance tester)*2
Input terminals and output terminals - Power terminal and functional
earth
Input terminals and output terminals - Non-electrifiable metal part
Power terminal - Non-electrifiable metal part
500 V AC / minute (600 V AC / second), cutoff current 10 mA *2
Input terminals and output terminals - Power terminal and functional
earth
Input terminals and output terminals - Non-electrifiable metal part
Power terminal - Non-electrifiable metal part
Approx. 10 years (at 25°C)
Approx. 1600 g
4-Camera type
Up to 4
2.0 A or less
0 to +40 °C (without icing and
dew condensation)