Connecting with a PC and a PLC
Connecting with a PC
Connect them with the dedicated cable, AFB85853,
which is sold separately. The arrangement of the
cables is shown on the right.
Although the broken lines in the right figure are also
connected in AFB85853, the connections of the
broken lines are not necessary when you make a
cable (or do not use AFB85853).
Connecting with a PLC
Connect them with a separately-sold cable,
AIP81842 (D-SUB9 pin, discrete wire) as
below.
AIP81842
About the broken line in the connecting
example, please refer to an instruction
manual of PLC to connect it as necessary.
Connections with Panasonic PLC (FP series)
FPΣ COM port: RS232C 1 channel type
FP-X COM port: RS232C 1channel type
•
When "Flow Control" is "None" or "Soft Flow"
•
When "Flow Control" is "Hard Flow"
FP0 COM port
391