Selecting a Camera
Select a camera image to set "Smart Edge (Line)" checker.
1.
Select "Area Setting" in "Smart
Edge (Line)" setting window.
2.
Select a camera No. in "Camera".
The image of the selected camera is
displayed.
Select a displayed image type (Live/Memory and Gray/Binary) or magnification in "Image Menu" opened
by pressing the F1 key.
Selecting Position Adjustment
Position Adjustment is helpful when position of an inspection object may move largely. Select a Position
Adjustment checker that has been already set. Refer to page 198 for details of position adjustment.
1.
Select "Position Adj." in Area Setting window.
The list of position adjustment is displayed.
If a position adjustment checker is not created, "Position Adj." cannot be selected.
2.
Select a Position Adjustment No. from the list.
When selecting a checker number for Position/Rotation Adjustment or Rotation Adjustment, the base angle
vary depending on the setting of "Base Angle".
Base Angle: Refer to page 194.
Selecting a Preprocess Group
Set a preprocess filter to apply on an image captured by a camera as necessary.
1.
Select "Approximate Line Detect Condition" > "Preprocess".
"Preprocess" window is displayed.
2.
Select a Preprocess group (A to E) in "Preprocess".
For details of preprocess, refer to page 81.
3.
After setting is completed, press the CANCEL key.
Return to "Approximate Line Detect Condition" setting window. The selected preprocess group is
displayed.
185