Xga Monitor - Panasonic PV500 User Manual

1.4 XGA Monitor

Product No.: ANPVM11021
1 Mounting hole
for mounting bracket
2 Adjustment volume
3 Mounting hole
VESA mount
4 RGB input connector
5 Power terminal
For the information of 15-inch monitor: ANPVM21522, refer to the instruction manual included with the product.
18
Attach the included mounting brackets.
The following adjustments are available.
BRIGHT Brightness
V-POS. Vertical Position
H-POS. Horizontal Position
PHASE Phase
CONT. Contrast
4-M4 (depth: 7mm), 75 x 75 mm
A connector for RGB signal input. To connect to the monitor with the VGA monitor
cable -ANMX8331X. (Connector: Mini D-sub, 15 pins, female)
Acceptable input voltage: 24V DC
Adjusts the brightness.
(Brightness: approx. 20 to 100%)
Adjusts the screen vertical position (in
16 lines).
Adjusts the screen horizontal position
(in 16 pixels).
Adjusts the screen flickering.
Adjusts the contrast.
R Image signal: Red
G Image signal: Green
B Image signal: Blue
GND Signal ground
HS Horizontal synchronizing signal
VS Vertical synchronizing signal