Panasonic PV500 User Manual page 205

Creating a Base Checker
1.
Select "Base Setting" in "Checker Settings"
setting window.
Now, it is ready for base checker setting.
2.
Select a base checker to set.
The setting window of selected base checker is
displayed.
3.
Set necessary items.
The setting procedure is the same as the other
checkers. For more details, refer to the chapter of
description of each checker.
Some items displayed in checkers are not
displayed in Position Adjustment. Nondisplayed
items cannot be set in Position Adjustment.
4.
Press the TRIG key to execute a test.
Only the currently setting base checker can be
tested. Confirm a test result in the same way of
normal checkers.
About Priority
The Priority function is effective if an object moves largely either vertically or horizontally. When the object
moves largely in the horizontal direction, set to "Horizontal". When it moves largely in the vertical direction, set
to "Vertical".
Example) When setting to "Horizontal", this checker calculates a horizontal shift amount first using the
horizontal base checker. And then, when executing the vertical base checker, it moves the area horizontally by
the shift amount calculated with the horizontal base checker and calculates the vertical shift amount at this
position. (When setting to "Vertical", the procedure is the other way round.
Horizontal Case
Setting
Vertical Case
Setting
Priority: No Priority: Horizontal
Priority: No Priority: Vertical
203