Panasonic PV500 User Manual page 229

Setting Judgement Limits
Set a tolerance (maximum and minimum values) of the calculated result. If the value is within the tolerance, the
object will be judged as "OK", if it is out of it, the object will be judged as "NG". If any judgement is not
necessary, there is no need to set.
1.
In numerical expression setting window,
select "Maximum" and enter a value.
2.
In numerical expression setting window,
select "Minimum" and enter a value.
3.
Press the TRIG key to execute a test and
confirm the judgement.
Maximum/Minimum values can be input in the
previous window, in the list of numerical
calculations.
Setting an Output Condition
Select whether or not to output calculation results to the external devices for each expression. Default setting is
set to output.
In addition to the setting for each expression, setting from "ENVIRONMENT" > "Input/Output" outputs numerical
calculation results to the external devices.
1.
Select "Output" in the numerical
calculation setting window.
2.
To output it, select "Yes". Select "No" not
to output.
Output conditions can be input in the previous
window, in the list of numerical calculations.
227