Panasonic PV500 User Manual page 126

Image to be displayed when reregistering a template
When a template is reregistered after executing an inspection, the image may be displayed in the moved or
rotated state. This is because the memory image (fig. 3 below) is displayed after being moved/rotated for the
difference between the position/angle when the template has been registered (fig. 1 below) and the
position/angle detected when executing the inspection (fig. 2 below).
Displaying the image like this enables the template to be reregistrated even when the object is inclined. (It is
not necessary to replace and recapture the object at the angle when it has been registered.)
1) When setting a template
Execute either way of the followings to clear the detection position when you do not want to display the image
corrected when reregistering.
·
Switching Types
·
Turning off the power to PV500
·
Changing the condition not to be detected such as setting the minimum correlation value of the first
step in Sequence to 1.000 and executing a trigger..
(After setting the template, reset the condition to the previous setting.)
Selecting a Template from Common Image Patterns
Other than templates created in each Smart Matching, PV500 provides with a function that saves common
templates to all types, including Position Adjustment and Area Size Adjustment, that can be selected in all
Smart Matchings as common using templates.
Common templates can be saved up to 2000 templates in 256 product types.
Setting a Template to Use Commonly
124
2) Detection position when
executing the inspection (test)
3) Image displayed when reregistering
(Dotted line shows the memory image.)