Panasonic PV500 User Manual page 364

Output
No. Signal
1 COMMON FLASH 0 designated common
3 COMMON FLASH 1 designated common
5 COMMON FLASH 2 designated common
7 COMMON FLASH 3 designated common
9 READ END 0 Image capture with Camera 0
complete
11 READ END 2 Image capture with Camera 2
complete
13 READY Ready completion signal
15 ACCEPT Signal of acceptance the next
signal
17 RESULT Total Judgement
19 STROB Data output complete
21 OUT 0 Output data 0-15
23 OUT 2
25 OUT 4
27 OUT 6
29 OUT 8
31 OUT 10
33 OUT 12
35 OUT 14
37 COMMON Common for output
39 NC* Unconnected
*NC = No connection
The output commons (No.37, 38) are for No.9 to 36. When you use Flash signals (Flash 0-3), connect with
respective designated commons (Pin No.1, 3, 5, 7).
*1: It cannot be accepted when ReadEnd signal is Off.
*2: Excepting when assigning function of "Abort Inspection/Process".
362
• TYPE
• DISPLAY
• REENTRY*1
• ASSIGN*2
No. Signal
2 FLASH 0 Flash signal for Camera 0
4 FLASH 1 Flash signal for Camera 1
6 FLASH 2 Flash signal for Camera 2
8 FLASH 3 Flash signal for Camera 3
10 READ END 1 Image capture with
Camera 1 complete
12 READ END 3 Image capture with
Camera 3 complete
14 ERROR 0 Error signal 0
16 ERROR 1 Error signal 1
18 TACT Inspection data read timing
20 RUN Running status (On when
running)
22 OUT 1 Output data 0-15
24 OUT 3
26 OUT 5
28 OUT 7
30 OUT 9
32 OUT 11
34 OUT 13
36 OUT 15
38 COMMON Common for output
40 NC* Unconnected