Panasonic PV500 User Manual page 271

Changing Display Color
The color of characters displayed in the checker list, of selecting cells and of enhanced cells can be changed.
1.
Press the FUNC key on the Checker list window.
The pop-up menu appears.
2.
Select "Colors.
The color setting window appears.
3.
Select an item to change its color.
The amount of containing Red, Green and Blue of the current
color of the selected item are displayed in the values of 0 to 255.
4.
Adjust RGB values to make a desired color.
The larger value makes the brighter color. The smaller value
makes the darker color.
Changing the value updates the color of "Enter" button. Observe
it to adjust the color.
5.
When it became the desired color, select "Enter". After
setting is completed, press the CANCEL key.
The color setting window reappears.
After setting the RGB values, pressing the CANCEL key before
selecting "Enter" restores the color.
6.
After setting the color, press the CANCEL key.
It returns to the checker list window.
Changing Checker Settings
(Jump to Setting Window)
After running a test by the TRIG key on the Checker list window, you can jump to the setting window from it the
Checker List to change or refer to the checker setting.
1.
Tilt the ENTER key up/down on the Checker
list window to select the checker list.
2.
Select a cell of the checker type and No. to
change the setting.
The setting window of the selected checker
appears.
3.
After setting is completed, press the CANCEL
key.
It returns to the checker list window.
269