Reading/Saving Setting Data (Save/Read); Saving Setting Data - Panasonic PV500 User Manual

4.17 Reading/saving Setting Data (Save/Read)

The settings set in SETUP menu and RUN menu can be saved. The information existing in the execution
memory can be saved in the saving memory of PV or a SD memory card except certain data*. This information
is "Setting data".
*The data to be specified in [TOOL] > [General] is individual information for each PV500 and saved in the
different area from the Storage Space of PV500. You cannot save in a SD memory card or copy into another
PV500.
Where to Save the Setting Data
The conditions in the execution memory are temporarily called up to execute programs and are not saved in the
memory.
Regarding types No.0 - 255 as a set of data, PV500 saves the data in "Storage Space in PV500". The data can
be saved also in a SD memory card.
Every time PV500 starts up, it reads a set of data from the storage space in PV500 to the execution memory.
(Refer to page 345.) And then, PV calls up a product type from the data to set inspection conditions and to
execute inspections.
Storage Space in PV500
(Max. 470 MB)

4.17.1 Saving Setting Data

This function saves data of 256 product types and environment data set in the execution memory into the main
memory or a SD card.
1.
Select "SAVE/READ" from the menu bar.
2.
Select "Save Setting Data".
The setting data saving window is displayed.
3.
Select "Storage Space in PV500" (or "SD Card") for
"Save to".
4.
Select the list and "No." to save.
Saving is executed.
An overwrite confirmation message appears if data already exists. Select [Yes] to overwrite and [No] to
save another area. To stop saving during the process, select "Abort". In this case, the destination area No.
will be cleared when the destination is the storage space in PV500. When it is a SD memory card, the
original data will be held.
When saving the data is completed, the saved information is displayed.
- Size (KB): Size of the setting data
- Version of the data created: Version of PV500 where the setting data was created
- Date: Date and time when the data was saved. The information of data and time is referred from the
calendar of PV500.
Execution Memory SD memory card (Max. 32 GB)
¥¥Panasonic MEW Vision ¥ PV500 ¥
SetData
289