Panasonic PV500 User Manual page 97

Hiding Pattern on Screen Window
The checker patterns displayed on the screen window can be hidden in SETUP Menu.
Pressing the F3 key switches between displaying and hiding.
Pattern Display
This selection is kept until you cut the power of PV500. Once you reboot PV500, the patterns will be displayed.
Common settings for checkers
The procedures for setting Preprocess, selecting Slice Level group and selecting Position Adjustment group set
for each checker are common to all checkers. As for Slice Level group, it is set only for the checkers that scan
objects with binary images.
Selecting Preprocess / Slice Level
Select a preprocess and slice level to apply on an image captured by a camera.
1.
Select "Inspection Condition" > "Preprocess".
"Preprocess" window is displayed.
2.
Select a Preprocess group (A to E) in "Preprocess".
For details of preprocess, refer to page 81.
3.
After setting is completed, press the CANCEL key.
Return to "Inspection Condition" setting window. The selected preprocess group is displayed.
4.
Select "Slice Level".
"Slice Level" setting window is displayed.
5.
Select a Slice Level group (A to Z).
For the details on binarization, refer to page 80.
6.
After setting is completed, press the CANCEL key.
Return to "Inspection Condition" setting window. The selected slice level group is displayed.
Selecting Position Adjustment
Position Adjustment is helpful when position or angle of an inspection object is unstable. Select a Position
Adjustment checker that has been already set. Refer to page 198 for details of position adjustment.
1.
Select "Position Adj." in Area Setting window.
The list of position adjustment is displayed.
If a position adjustment checker is not created, "Position Adj." cannot be selected.
2.
Select a Position Adjustment No. from the list.
Hide Pattern
95