Selecting An Image Output Condition - Panasonic PV500 User Manual

4.12.3 Selecting an Image Output Condition

Inspected images can be saved in the image memory of PV500 and output to the external devices when the
judgement of the judging checker is "NG" during an inspection. Select a judging checker to be a condition to
output images.
This setting is available only when the condition of "Image Output" (or "Save Image Memory") is set to "NG
judgement". These conditions can be set from "Input/Output" of "ENVIRONMENT".
This setting is available only when the condition of "Image Output" is set to "NG Judgement" or "Judge. Per
Cam.". These conditions can be set from "Input/Output" of "ENVIRONMENT".(Refer to page 284 or page 286.)
How to output inspected images
NG Judgment
Judge. Per Cam.
(Available from
Ver.2.30)
Selecting a Condition Expression of Inspection
Image Output
When Output Condition is "NG Judgment" and Execution Mode is "Execute All"
1.
Select "Condition" in judgement output setting window.
"Condition" setting window is displayed.
2.
Select "Condition" column of Save Img. Memory or Image Output.
Select a judgment type to register.
No]: Not to output images.
[No Condition]: Always output images
regardless of inspection
results.
[JRC]:
Use a JRC (Internal) as a
condition to image output.
[JDC]: Use a JRC (External) as a
condition to image output.
**Select "No Condition" to temporarily output images regardless of a judgement condition when the image
output condition is set to "NG Judgement" or "Judge. Per Cam." which is on the window of "Input/Output" of
"ENVIRONMENT".
When the other conditions are selected than "NG Judgement" and "Judge. Per Cam.", the setting of
Judgment window is invalid.
(For the setting of "NG Judgement", refer to page 284.)
3.
Select "Checker No." column and enter a judgment number.
The status of the image output is displayed in the "Result" column.
"No" indicates that image output is not executed because the condition is not fulfilled.
4.
After setting is completed, press the CANCEL key.
Now you completed registering.
248
Outputs all images of the cameras which set to "Output" when the result of one
judgement expression is NG.
Outputs only the images of cameras whose results of each specified judgement
expression are NG.