About The Ax40 - Panasonic MICRO-IMAGECHECKER AX40 User Manual

1.1 About the AX40

No. Designation
1 External output terminal
(16 pins)
2 External input terminal
(15 pins)
3 Power terminal
4 Operating LEDs
5 CF card slot
6 TOOL port (Ethernet
Port)
7 KEYPAD connector
8 COM1 port (RS232C
port)
9 Camera connectors
10 MONITOR
11 DIN rail attachment
lever (for hooking with
one-touch operation)
12 Backup battery
Caution
Connect only the specified products to the AX40.
2
Description
An external output terminal. The AX40 uses a Phoenix connector (product
#: 1840502).
An external input terminal. COMMON terminal is for (+/-). The AX40 uses a
Phoenix terminal block (product #: 1840528).
Acceptable input voltage is 24V DC. The power terminal is located on the
input terminal block.
Indicate the operating status of the AX40.
• POWER (green):
The green LED is lit while the AX40 is being energized.
• ERROR (red):
The red LED is lit when an error is detected.
• READY (green):
The green LED is lit when various signals including start signal can be input.
Supports for a FAT16- formatted and up to 512 MB of compact flash
memory.
Connects to the external device via Ethernet port. Use a cross cable for the
connection.
Connects to the operation keypad.
Connects to an external device via the port.
Connect up to two cameras: CAMERA 1 and CAMERA 2.
Connects to the VGA monitor
Offers quick and easy mounting of the device onto the DIN rail.
This is a battery for retaining information about calendar in the AX40. If the
backup battery runs out, the screen monitor displays "Battery used up!"". In
such a case, replace with a new battery. Product number: AFPG804
(Effective life: About 10 years at 25°C)