Panasonic MICRO-IMAGECHECKER AX40 User Manual page 232

Re-registering Templates of Smart Matching and Contour Matching (%A)
This is a command for re-registering a template for Smart Matching and Contour Matching by the signals
from the external device.
Re-registering the Template-Display Area: No
Communication Command / Description
Direction
Transmission Data
from the External
Device to the AX40
??: 01 to 99 (Specify checker number of Smart Matching or Contour Matching
Response- OK:
Re-registration
complete
Response-Error 1
Cause
•
•
Response-Error 2
ERROR signal is
output from the
Cause
parallel output port.
•
•
•
•
•
• While a live image is displayed, after the image is captured, it is newly re-registered.
• When a memory image is displayed, the current memory image (the last imported image) is
re-registered.
• AX40 will lose the images if power is removed before you save them. If you do not want to let
the device lose the images after power is removed, save the current settings by selecting
"Save" from the tool bar or by inputting the command "%M
save the current setting data.
224
% A ? ? CR
% A CR
% U CR
Command in the unspecified form or not provided was received.
Examples:
C
% A9 (any other checker number than 01 - 99 was specified.)
R
C
%B01 (not provided command)
R
% Z CR
The checker types already created to the specified numbers are not Smart Matching or
Contour Matching.
Template is not registered with the Smart Matching or Contour Matching already
created to the specified number.
As the image in the re-registration area has no feature, it cannot be registered as a
template.
When re-registration position = Adjusting Position, Group Position Adjustment (or
Rotation Adjustment) is NG
When re-registration position = Adjusting Position, the position adjusted with Group
Position Adjustment (or Rotation Adjustment) is out of the screen.
C
" from the external device to
R