Panasonic MICRO-IMAGECHECKER AX40 User Manual page 203

Switching the Display Color
1. Select "ENVIRONMENT" > "RUN Mode Display Settings".
2. Select "Display Color".
The Display Color menu is displayed. But, some parts of the images
cannot be displayed depending on the preprocess setting and the display
color.
Option Image to be displayed
Color Full-color image
Gray Gray/Differential Image
(Available if preprocess is set to "Gray" or "Differential".)
Group A ~ Preprocess:
Group H Extraction
Preprocess: Gray
or Differential
Group A - H All the areas of the colors that are specified as an extraction color
are displayed in full color (, but other areas are displayed in gray).
(Selectable only if the image has been preprocessed with the
Extraction feature)
Only "Color" is available for the following settings.
Setting content
Display image
•
•
Preprocess
•
•
3. Select a display color to display.
The relationship between processing procedures for memory setting and selectable display colors
is as follows:
Processing procedure
Extraction image
Gray image
Differential image
Only the areas of the color that is specified
as each extraction color are displayed in
color (, but other areas are displayed in
gray).
Binary image of the specified binary level
for each group is displayed.
Live-2 display
Memory-2 display
Color/Gray image
Extraction/Differential image
Selectable display color
Color, Group A, Group H, Group A - H
Color, Gray, Group A, Group H
Color, Gray, Group A, Group H
Selectable Display Change
Color
195