Position Adjustment (Matching) - Panasonic MICRO-IMAGECHECKER AX40 User Manual

6.20 Position Adjustment (Matching)

6.20.1 Setting Procedure
The detection and setting procedures of an object are the same for Smart Matching. (See page 100.) In
this section, the differences between Position adjustment (Matching) and Smart Matching and the way of
testing are described below.
The Items that cannot be set with this feature
With the Position Adjustment (Matching) function, you cannot set the following items.
• Subtraction setting (Subtraction can not be performed.)
• Rotation Angle Range
• Rotation Accuracy
Execution of a test
Before registering a base position, you can perform a test to check if Horizontal/Vertical Areas can detect
an object. When a live image is currently displayed, a test is performed after importing a new image.
When a Memory image is displayed, a test is performed with the Memory image currently displayed
without importing any images.
1. Select "POS. ADJ. (Matching)".
2. Press the A key while the tab or the item is highlighted.
If no edge was detected, the following error code will appear under the judgement results in the message
area.
E0044
Check to make sure that the error code above does not appear or the object is detected by using the
image.
• You can assign a different base image (template) to Area 1 and Area 2.
• You can set the different values for Search Sequence between Area 1 and Area 2.
137