Panasonic MICRO-IMAGECHECKER AX40 User Manual page 246

Data Save (%M)
This command stores the currently set data in the AX40.
Communication direction
Sending Data from
External Device
Response- At normal
operation: Data saving
completed.
Response- Error: Failed
to save data.
ERROR signal is output
from the parallel output
port.
Switching to Another Type (%X)
This is a command to call the product type to execute inspection.
Communication direction
Sending Command from
External device
Response - At normal
operation: Product type
change completed.
Response: Error 1
Response: Error 2
ERROR signal is output
from the parallel output
port.
238
Command / Description
% M CR
% M CR
% Z CR
Cause
• The AX40 failed to save the data.
Command / Description
% X ? ? CR
?? : 01 - 16 (Specify a product type No.)
% Y ? ? CR
?? : 01 - 16 (Product Type No.)
% U CR
Cause
• Command in the unspecified form or not provided was received.
Examples:
C
- %X1 (any other checker number than 01 to 16 was specified)
R
C
- %J02 (not provided command)
R
% Z CR
Cause
• The specified product type has not been created.