Panasonic MICRO-IMAGECHECKER AX40 User Manual page 202

Switching the display image
1. Select "ENVIRONMENT" > "RUN Mode Image Settings".
2. Select "Display Image".
The Display Image menu is displayed.
Option Image to be displayed
Live – C1 Live-image of Memory 1 (real-time image )
Live – C2 Live-image of Memory 2 (real-time image)
Live –2 Live-image of Memory 1, Memory 2 (real-time
display image)
Memory C1 Memory-image of memory 1(still image for
inspection execution)
Memory C2 Memory-image of Memory 2 (still image for
inspection execution)
Memory2 Memory 1 and Memory 2 (still image for inspection
display execution)
But, some parts of the images cannot be displayed depending on the preprocess setting and the display
color.
Example:
If Display Image = Gray, Memory 1 = Extraction, Memory 2 = Gray, Live-C2 or Memory-C2 is selectable for
switching display images.
3. Move the cursor to the image to change and press the ENTER key.
• When you display a live image, the capture time of a live image is longer than that of a
memory image. At the time of inspection, it is advisable to display Memory C, Memory 2 or
Memory 2 display.
• When inspection is executed with the Image Save function while the last saved image is
displayed," select Memory C1 or Memory 2 without fail.
194