13.2 Inserting and Removing the CF Card
13.2.1 Inserting the CF Card
The FAT16 (FAT) formatted CF* card with up to 512 MB storage capacity (called a memory card) can be
used for the AX40. Insert the CF card facing toward the terminal block into the slot for a CF card. When
the CF card is properly inserted into a slot, the eject button located above the slot will come out.
13.2.2 Removing the CF Card
When removing the CF card while the device is turned off, follow the steps below.
1.
Select "CARD" from the menu bar in SETUP mode.
The CARD menu is displayed.
2.
Select "Eject".
The dialog message box appears saying "Do you really want to remove CF card?"
3.
Choose "YES".
After the following message appears and press the ENTER key.
"Now safe to eject."
4.
Press the eject button located above the slot.
Eject the Compact Flash memory card by pressing the eject button above the slot on the front side of the
AX40.
•
Compact Flash memory card is displayed as "CF" or "CARD" in the menu bar.
•
Do not confuse the orientation of CF card. Otherwise, the Compact Flash memory card or the
AX40 may be damaged.
255