12.2.2 Communicating with a Computer Using Multiple AX40s
TCP/IP Setting
In the same settings above, assign TCP/IP.
Avoid assigning duplication of IP addresses.
Correct Example:
The First AX40
The Second AX40
The Computer
Connection with Multiple
When communicating between a computer and
multiple AX40s, you need to use a hub or rooter for
100BASE-TX or 10BASE -T. Connect between the
AX40 and a hub/router, or between a hub/router and
the computer with a straight cable (category 5E).
•
It is impossible to synchronously communicate between the AX40 and multiple computers
connected to the network.
•
You cannot communicate (receive or send data) with the multiple AX40s connected to the
network.
252
192.168.1.254
192.168.1.253
192.168.1.100