Serial (Per Start)/Serial (Async.); Slecting Outputting Procedure/Data; Device - Panasonic MICRO-IMAGECHECKER AX40 User Manual

11.2 Serial (Per Start)/Serial (Async.)

If "Serial (Per Start)" or "Serial (Async.)" is used for communication, set a communication method, output
data and format for the output data or receiving a command from the external device. Select
"ENVIRONMENT" > "Output Setting" or "Serial Setting" from the menu bar.

11.2.1 Slecting Outputting Procedure/Data

Selecting outputting setting/data here.
Item Option
Output No/Serial (Per Start)/Computer
Setting Link/Serial (Async.) /Ethernet/Card
Output Data: Judgement/Data Monitor/Both
Output Digit 0 to 11 (Output Setting: Not available in
Computer Link)
Invalid Digit Delete/Zero (Output setting: Not
available in Computer Link)
The following items are available only for computer link mode.
Refer to page 241 for further details: PLC Model, Start Register, Timeout and Data Type
11.2.2 Format of the Commands from the External Device
Serial Setting- Specifying the Digit Number of the Items for the Command
Item Selection
Data Digit: To specify how to segment each item of the commands from the external device
Valid
Fixed
(4 Digit)
Invalid Digit: To determine what is specified as invalid digit if each item of the commands is less than 4
digits when "Fixed (4 Digit)" is specified.
Space
Zero
Description
Insert commas between the items.
Specify a command with 4 digits. Do not insert a symbol to separate each
items.
If the digit number of each item is less than 4, the spaces will be allocated
to the invalid numbers.
If the digit number of each item is less than 4, "0" will be allocated to the
invalid numbers.
Description
Select the output destinations or methods
Select output data from Judgement/ Data
Monitor/Both.
Set the maximum number of digits to output.
If the data are under the number of output
digits, select "Delete/0".
219