Panasonic MICRO-IMAGECHECKER AX40 User Manual page 240

Sending Command from external device (Command Digit: Fixed (4 Digit))
Communication Command / Description
direction
Sending Command
from External
Device
nnnn: 0001 to 0255 or
nnnn
nnnn
Response: At
normal operation
(at the end of
nnnn: 0001 to 0255 or 0001 to 0255 (Edge threshold)
setting)
nnnn
nnnn
Response: Error 1
Cause
•
Response: Error 2
ERROR signal is
output from the
Cause
parallel output port.
•
•
232
% G ? ? n n n
1 to 0255 (Edge threshold)
:0001 to 0255: If invalid digit = 0
:0001 to 0255: If invalid digit = space
% G ? ? n n n
:0001 to 0255: If invalid digit = 0
:0001 to 0255: If invalid digit = space
% U CR
Command in the unspecified form or not provided was received.
Examples:
C
- %G1,80 (any other checker number than 01 - 99 was specified.)
R
C
- %B01,80 (not provided command)
R
% Z CR
Checker No. specified by a sending command does not include the target checker.
The edge threshold specified by a sending command is not between 001 and 0255 or
001 and 0255.
n CR
n CR