Copying The Screen Display - Panasonic MICRO-IMAGECHECKER AX40 User Manual

13.4 Copying the Screen Display

You can copy the contents displayed on the entire screen following the steps below. As the data are
saved as bitmap, they can be edited on the computer. This feature is available in the RUN or SETUP
mode.
1. Keep and hold down the B key for more than one second while the desired screen is
displayed
The following message appears in the lower area of the status display area.
PRINT SCREEN
Now saving. Wait a minute. Printing of a screen is completed after the menu disappears.
NO CF CARD
The device does not recognize the CF card.
If the message appears, make sure to check if the CF card is surely inserted.
If you use the CF card that does not have enough storage capacity to save the setting or image
data and the following message will be displayed.
MEMORY USED UP. PRESS ANY KEY.
262