A List Of Commands - Panasonic MICRO-IMAGECHECKER AX40 User Manual

11.2.5 A List of Commands

AX40 provides the following commands:
Type of Command
Commands for inspection start
Commands for reading or
changing the setting data stored
in the AX40
Others
• About the commands for changing each setting value
AX40 will lose the images if power is removed before you save them.
• Smart Matching, Contour Matching - Re-registering templates
- Binary Level: Changing upper/lower limits
- Gray Edge: Changing edge threshold
- Num. Calcu.: Changing upper/lower threshold
222
Command
To execute inspection
To transmit product type and environment data
from a CF card to the AX40
Smart Matching, Contour Matching -
Re-registering a template
Binary Level - Reading Min./ Max
Binary Level - Changing Min./ Max.
Gray Edge - Reading threshold of edge
Gray Edge - Changing threshold of edge
Num. Calcu.- Reading Min./Max.
Num. Calcu. - Changing Min./Max.
Data Save - Storing the current settings in the
AX40
Switching to another product type
Resetting Statistics Data
Changing Display Image
To Emulate the Keypad
Page
%S
223
%F 223
%A 224
%L 226
%T 227
%H
229
%G
231
%C 235
%N 236
%M 238
%X
238
%Q 239
%I
239
%K
240