Panasonic MICRO-IMAGECHECKER AX40 User Manual page 259

Disconnecting Ethernet communication from Telnet
To disconnect Ethernet communication, follow the steps below.
1. Remove power from the AX40.
2. Disconnect communication via Telnet.
If disconnecting the communication from Telnet or removing the Ethernet cable before removing
power from the AX40, the AX40 may not recognize the connection with the device when you
reconnect with the device from Telnet. In such cases, execute multiple inspections by inputting
START signal or pressing the A key on the keypad for proper recognition of the connection.
251