Registering the Password
1.
Select "ENVIRONMENT" >"Initial Settings" from the menu bar.
The ENVIRONMENTAL menu under is displayed.
2.
Move the ENTER key to select "Password".
The available characters for password are displayed.
3.
Tilt the ENTER key to select the letter you want to enter, and then press the ENTER key.
The selected letters are displayed. Specify the password including up to 8 characters.
4.
After entering the password, select "Enter" shown at the right corner of the screen.
When returning to the "Initial Setting" menu, asterisks as many as the password you have set are
displayed in the "Password" field.
If you press the C key before pressing the ENTER key, the password you have set will be canceled.
•
BS (Back Space): Deletes one letter before the cursor position.
•
<-, ->: Cursor in the product type name field moves to the arrow directions.
191