Outputting Inspection Results To A Cf Card - Panasonic MICRO-IMAGECHECKER AX40 User Manual

13.5 Outputting Inspection Results to a CF Card

The inspection results can be output to a CF card.
Destination File
The output data are stored in the following text file.
RES20031117.txt
RES:
Fixed
20031117:
Unfixed The calendar information is used based on the date when the data
are output, and updated when the AX40 is turned on. Therefore, if the date
has been changed while the device is on, the device will keep outputting to
the file created on or before the previous date.
Saved Data
• Judgement result of judgement (up to 8 points)
• Judgement results quoted to data monitor, analysis data of statistics (up to 50 points)
The data format is the same as the one that were used for communication with RS232C.
See page 220.
To output inspection results to a CF card:
1. Select "ENVIRONMENT" > "Result Output Settings" > "Output Settings" from the menu bar.
The subwindow appears.
2. Select "CARD".
263