Panasonic MICRO-IMAGECHECKER AX40 User Manual page 81

Setting a Mask Area
You can set up to 16 mask areas per checker.
1. Select "Area" from the CHECKER menu.
The Area menu is displayed.
2. Select "Add Mask".
3. Choose the desired shape of area from "Rectangle", "Circle", or "Polygon".
A mask area is added to the center of the image display area.
Changing Position and Size of an Area or a Mask Area
If you set mask areas, the mask areas are displayed on the screen. The way of selecting the areas or
mask areas that you wish to edit is described below.
1. Select "Area" from the CHECKER menu.
The Area menu is displayed.
2. Select "Change".
The color of area will be displayed in yellow, and its start and end points are shown. If
you have already set a mask area, display the area and the mask area in yellow by
tilting the ENTER key up or down and press the ENTER key to select the area you
want to change.
3. In the same steps for setting a mask area, set the mask area "Move" >
"Start Point" > "End Point".
73