2.2.2 Mounting the AX40
There are the two ways to mount the AX40, by using screws or by hooking on the DIN rail.
Mounting the AX40 on the DIN rail
The AX40 can be mounted on or removed from a 35 mm wide DIN rail (DIN EN50022) with a single easy
operation.
To mount the AX40 on the DIN rail:
1.
Hook the AX40 onto the DIN rail.
2.
Press the lower part of the device to
fix it into position.
To remove the AX40 from the DIN
rail:
1.
Insert the slot-head driver into the
mounting lever.
2.
Press the mounting lever
downward.
3.
Lift and detach the AX40.
Mounting the AX40 to the VGA Monitor
11