Panasonic MICRO-IMAGECHECKER AX40 User Manual page 106

Settings of Conditions:
Sets the following items on the Condition tab.
Item
Labeling
*2
Boundary
Perimeter/Projection
Width
Angle of principal
axis
• *1
When setting "Labeling" to "No"
- Perimeter/Projection Width cannot be detected.
- Since the Boundary function is activated, you cannot change the setting.
• *2
In the following cases, the function of feature data detection is automatically set to "Off" and
the setting cannot be changed.
- Inspection area is circle and polygonal.
- Mask Area has been set.
- Labeling is deactivated.
98
Selections Descriptions
*1
Yes/ No This is a function to detect each Feature data when there are
multiple objects in the area. Set this function to "No" only when
you want to detect total area and gravity of whole objects.
This feature allows you to select whether you want to detect an object of which
portion is located on the frame of an inspection area or not.
On Detects the objects that are within or on the inspection area.
Off Not detects the objects that are located within or on the frame
of the inspection.
Yes/ No Set whether to detect Perimeter or Projection Width.
Yes/ No Set whether to detect principal axis angle or not.