9.4.7 Testing by Using a Saved Image
The saved images can be displayed in the image display area for memory images. Even if the camera
cannot take an object, you can create and adjust a checker by saving it in advance.
Setting Procedure
1.
Press the B key in SETUP mode.
The subwindow is displayed.
2.
Highlight "Load Saved Image".
The two sets of saved images (Memory 1 and
Memory 2) are displayed. The image information is
also displayed. To display the next saved image,
tilt the ENTER key upward or downward.
3.
Display the image to which you want to refer
to and press the ENTER key.
The current memory image is erased and the
specified image is called as a memory image.
Adjust a checker or execute a test using a saved image that you called while a memory image is displayed.
If a live image is displayed during testing, the saved image will be erased, because the device imports a
new image during executing the test.
Even if a saved image is called to the current memory, it cannot be erased from the saved image
memory.
203