Panasonic MICRO-IMAGECHECKER AX40 User Manual page 245

Command Digit: "Fixed (4 Digit)"
As for this command, you can send more than 5-digit data regardless of a fixed 4-digit command.
Communication Command / Description
direction
% N ?
Sending Data from
External Device
??: 01 – 99 (Numeric calculation No.)
Min.: 12 Fixed (12 Digit)
(- 02147483648 to 002147483647 or - 02147483648 to 002147483647)
Max.: 12 Fixed
( - 02147483648 to 002147483647 or - 02147483648 to 002147483647)
- 02147483648 to 002147483647: If invalid digit=0
- 02147483648 to 002147483647: If invalid digit=space
% N ?
Response: Normal
operation (At the
end of setting)
??:01- 99 (Numeric calculation No.)
Min.: 12 Fixed (12 Digit)
(- 02147483648 to 002147483647 or - 02147483648 to 002147483647)
Max.: 12 Fixed
( - 02147483648 to 002147483647 or - 02147483648 to 002147483647)
- 02147483648 to 002147483647: If invalid digit = 0
- 02147483648 to 002147483647: If invalid digit = space
% U CR
Response: Error 1
Cause
•
% Z CR
Response: Error 2
ERROR signal is
output from the
Cause
parallel output port.
•
•
To specify the command digit ("valid/fixed (4 Digit)"), select "ENVIRONMENT" > "Serial Settings">
"Command Digit" from the menu bar.
? Min. Max.
? Min. Max.
Command in the unspecified form or not provided was received.
Examples
- %C3-02147483648002147483647
99 was specified)
- %B03-02147483648002147483647
The Max. value specified by the sending command is smaller than the Min. value.
The Max./Min. values specified by a sending command are not within the settable range.
CR
CR
C
(any other checker number than 01 to
R
C
(not provided command)
R
237