Setting Com Port - Panasonic MICRO-IMAGECHECKER AX40 User Manual

11.2.3 Setting COM Port

A way of setting the COM port for RS232C communication is described below. The setting values of the
COM port should be the same as that of the external device.
Serial Setting - Specifying Command Digit
Item Selections
Transmission 1200/ 2400/ 4800/ 9600/ 19200/ 38400/
Speed 57600/ 115200 (Initial value: 9600)
Bit length 7 / 8 (Initial value: 8)
Stop Bit 1 / 2 (Initial Value: 1)
Parity None/Odd/Even (Initial value: Odd)
Flow Control None/Software (Initial value: None)
220
Descriptions
The values above are transmission speed.
The higher number the faster communication
speed.
Sets the number of bits per letter
Sets the bit number of the signals that
recognizes the end of data
Sets the number of overhead bits to check for
proper data transmission.
Sets how to control the handshake flow