Setting Procedure-Adding a Phase
1.
Highlight "Sequence".
The "1ST" cell in the Step column is highlighted.
2.
Select the phase you want to add and press the ENTER key.
The cell in the Acc. row is highlighted.
3.
Press the ENTER key.
4.
Choose any number other than "0" and press the ENTER key.
Now the phase was added.
Note that you cannot delete only the middle phases. For example, if you wish to delete the 4th
phase when the phases from 1st to 5th are already assigned, the 5th phase will be also
automatically deleted.
107