Panasonic MICRO-IMAGECHECKER AX40 User Manual page 265

Restoring SETUP data
When you restore the backed up setting data in the AX40, follow the steps below. Note that whole
Product Type data stored in the AX40 will be erased after executing restore.
1. Select "CARD" from the menu bar in the SETUP mode.
The CARD menu is displayed.
2. Select "Restore".
The subwindow appears.
If the following message appears, make sure to check if the CF card is surely inserted.
E0220 CF card is not inserted.
3. Highlight "Setting Data" and press the ENTER key. Assign a number between 01 and 99 of the
folder in which the setting data you want to restore exist
You can specify only the number of the folder where the setting data exist. in the CF card.
4. Specify the number of the setting data and press the ENTER key.
Restoring the setting data starts. The Restore menu disappears after the restoring is completed.
Even if only one Product Type file exists in the source folder, all the Product Type data saved in
the AX40 will be erased during restoring. To add only one Product Type to the Product Type data
currently exist in the AX40, restore the folder after backing up the Product Data stored in the AX40
and adding the data file to it.
257