Table of Contents
Advertisement
9.4.3 Setting Name of Image Save File
1.
Select "ENVIRONMENT" > "Image Output Settings" from the menu bar, and select "File Name" tab
> "Header".
Set a header in a (fixed) file name. Default value is "Image".
2.
Create a header of less than 16 letters using the soft keyboard.
In the example shown below, the header is set to "TEST". If you cleared the header in the file name by
clicking the BS button and clicked the Enter key, the number of digits of the header becomes 0.
3.
Select "Additional Information 1".
You can add up to four types of Additional Information (1-4) after the header in a file name.
•
Year-Month-Day:
yyyymmdd
•
Time-Minute-Second:
hhmmss
•
Total Judg.: OK or NG
•
Type number: nn
•
If the Compact Flash memory card does not have enough storage capacity to save the setting or image
data, no more images are saved. A message saying you failed to save the image is not displayed or no
signals are output.
•
Once you output an image, you cannot restore it to the PV310 by selecting "CARD" >"Restore", but the
followings are exceptions.
When restoring the
image to an image save
area
When restoring the
image as a memory
image
236
1.
Change the file name as follows:
Image00 nn m
Image00: Fixed, nn: 01 - 16 (Image No.), m: 1 or 2 (Camera No.)
2.
Store the image in the following folder in the Compact Flash memory
card
Panasonic MEW Vision\PV310\ Image\Image NN (NN = 01-99)
1.
Change the file name as follows:
Image captured by Camera 1: Image00001.bmp
Image captured by Camera 2: Image00002.bmp
2.
Store the image in the following folder in the Compact Flash memory
card.
Panasonic MEW Vision\PV310\ Image\Image NN (NN = 01-99)
Advertisement
Table of Contents
