Numeric Calculation (Ca01 To Ca99); Main Functions; Reference Data And Calculation Functions - Panasonic MICRO-IMAGECHECKER PV310 Use Manual

7.2 Numeric Calculation (CA01 to CA99)

7.2.1 Main Functions

Performing Calculations
This is a function to perform four arithmetic operations, trigonometrical functions. Up to 99 numeric calculations
can be set for each product type. See "Numeric Calculation and Input/Output Unit" for more information
Judging the Calculation Results
The numeric calculations are judged according to the acceptable range for OK judgment that you have set. If the
results of the numeric calculations are within the range, it is judged as "OK; otherwise, "NG". The upper limit of
the range is called "Max." and the lower limit of the range "Min.".
Preparing for Outputting Data to the External Device
If you want to output the measured data to the external device, "Yes" must be displayed in the cell in the OUTPUT
column for each numeric calculation.

7.2.2 Reference Data and Calculation Functions

A List of the Data Can Be Referred to Numeric Calculation
The following reference data can be incorporated into Numeric Calculation formulas. After performing
calculations, the formulas including the symbols and numbers from 0 to 9 in the table below are displayed.
Reference Data
Checker Position
Adjustment /
Rotation
Adjustment
Binary Window
Gray Window
Binary Edge
Gray Edge
Symbol Checker Object
No. No.
PA 01 – 99 0
1 – 2
BW 01 – 99 -
GW 01 – 99 -
BE 01 – 99 -
GE 01 – 99 01
01 –
99
Refer. Reference Data
No.
1 X Adjustment Amount
2 Y Adjustment Amount
3 Theta Adjustment
Amount
4 X Coordinate
5 Y Coordinate
6 Proj. X Axis
7 Proj. Y Axis
- Area
- Average
1 X Coordinate
2 Y Coordinate
3 Proj. X Axis
4 Proj. Y Axis
0 Det. Count
1 X Coordinate
2 Y Coordinate
3 Proj. X Axis
4 Proj. Y Axis
Output Multiple
(*1
value
10-fold
10-fold
10-fold
10-fold
10-fold
10-fold
10-fold
10-fold
10-fold
10-fold
10-fold
10-fold
10-fold
10-fold
10-fold
169