Table of Contents
Advertisement
7.3.3 Creating a Judgment Formula
If the results judged by a Position Adjustment checker saved as checker No. 1 and a Contour Matching checker
saved as checker No. 2 are both OK, the Judgment formula can be created and saved as Judgment No. 1 (JD01)
following the procedure shown below.
For example:
1.
Select "TOOL" > "Calcu. -Stat.-Output" from the tool
bar.
The subwindow is displayed.
2.
Select the Judgment tab.
3.
Select "JD01".
The cursor moves to the JD01 cell in the program column.
4.
Check to make sure that the cursor is in the program
area and press the ENTER key.
The program window is displayed.
5.
Highlight "CHECKER".
A list of checkers is displayed.
6.
Select checker No. 1 in the checker list.
Returns to the menu displayed at step 4. "PA01" is
displayed in the program area. Select "Backsp." to erase
"PA01".
7.
Highlight "And (*)".
"PA01*" is displayed in the program area
8.
In the same steps from 5 to 6, quote Contour Matching
checker saved as checker No. 2.
"PA01*CM02" is displayed in the program area.
9.
Press the C key twice.
When the dialog message shown below appears, choose
"YES" to continue.
Now you finished saving the program formula.
Pressing the A key to perform a test displays the judgment result.
185
Advertisement
Table of Contents
