Table of Contents
Advertisement
Changing the Slice Level - Manual Setting
1.
Follow the steps 1 through 3 for automatically changing the
slice level.
2.
Select "Upper" or "Lower".
3.
Change the values while checking the image, and then press
the ENTER key to determine the value.
4.
When you finished setting an "Upper" and a "Lower" value,
press the C key.
The message box appears.
5.
Choose "YES" to save the values you have set. (Choose "NO" to cancel.)
Returns to the checker menu.
Selecting the Slice Level Group
Follow the steps below to select the optimum slice level that has been already saved.
1.
Select "Slice Level" from the CHECKER menu.
The subwindow for slice level selection is displayed.
2.
Choose "Select".
The list of slice is displayed. The selected (highlighted) slice level and its binary
image are displayed in the image display area.
3.
Select the desired slice level.
Return to the checker menu, and check to make sure that the selected slice level is
displayed.
81
Advertisement
Table of Contents
