Table of Contents
Advertisement
Notes on Mounting a Camera
•
Fix the camera securely. You can mount the camera directly or with a designated
to the dimensional diagram when you mount the
When you mount the camera using screws without designated
into the inside of the camera less than 2.5 mm from its bottom.
•
The side of the plate mounted is the bottom of capturing images displayed on the screen. The mounting
direction of the camera determines the angle of captured image. Note that it is impossible to rotate
captured images with the PV310.
•
To avoid the effect of a variation within mounting dimensional tolerance of CCD element, be sure to verify it
with an actual image.
•
If the positive terminal of the power supply is connected to ground, be sure to mount the camera in an
electrically insulated way. When connecting between the PV310 and the camera with a camera cable, the
camera case (outer shell) is connected to the internal circuit ground. Therefore, if the camera is directly
mounted on the device without insulation, a short-circuit condition occurs between the +24V terminal and
0V (GND) terminal, resulting in damaging the internal circuit.
Also, even in the case where the negative terminal of the power supply is connected to ground, when you
mount the camera on a device with a different electric potential, the parts inside the camera may be
damaged. Be sure to mount it in an electrically insulated way.
* From the shipment of May 2007.
24
camera.
mounting plate (*insulation type). Refer
mounting plate
, bear in mind that screws come
Advertisement
Table of Contents
