Checking The Machine Head Switch; Setting Method For Standard Depression Strokes (Foot Switch) - Brother KE-430F Service Manual

11-21. Checking the machine head switch

11-22. Setting method for standard depression strokes (Foot switch)

Use the following procedure to set the operating positions for the depression stroke.
1 Signal setting entry
Memorizing the maximum forward position
2
3 Memorizing the neutral position
Memorizing the maximum backward position
4
1. Turn on the power switch.
2. Check that no error numbers appear on the operation
panel.
<If error [E050], [E051] or [E055] is displayed>
If the machine head switch (1) is not turned on, error [E050],
[E051] or [E055] will occur.
Use the screw (2) to adjust the installation position of the
machine head switch as shown in the illustration
2295B
While pressing the
switch.
・
"PdL" will illuminate in the PROGRAM No. display
and "1.Frt" will illuminate will illuminate in the menu
display.
With the foot switch depressed all the way forward, wait
until the value in the TENSION display stabilizes and
then press the ENTER key.
* XXX indicates the treadle depression voltage.
With your foot released from the foot switch, wait until the
value in the TENSION display stabilizes and then press
the ENTER key.
With the foot switch depressed all the way backward,
wait until the value in the TENSION display stabilizes and
then press the ENTER key.
KE-430F, BE-438F
11. ADJUSTMENT
.
and key, turn on the power
(Continued on next page.)
2826B
2827B
2828B
2829B
127