Setting Memory Switches (Advanced) - Brother KE-430F Service Manual

4-3. Setting memory switches (Advanced)

1 Change the mode to memory switch setting mode.
2 Select the memory switch that you would like to
change the setting for.
If you would like to display only the numbers of
memory switches that have been changed from
default settings
3 Change the memory switch setting.
4 Apply the changed setting.
5
Repeat steps 2 to 4 above to set each memory switch.
Exit setting mode.
6
All indicators switch off
TEST indicator switches off
KE-430F, BE-438F
While pressing the TEST key and the SELECT key, turn
on the power switch.
・ The memory switch number will be displayed in the
PROGRAM No. display and the setting value for that
number will be displayed in the menu display.
Press the or
number.
While pressing the SELECT key, press the
(1).
・ The numbers of memory switches that have been
changed from default settings will appear in order.
Press the or
・ The flashing display means that the setting has not yet
been applied.
・ You can make the initial setting appear in the display
by pressing the RESET key.
Press the ENTER key.
・ The menu display will change from flashing to
illuminated, and this means that the parameter setting
has been applied.
・ If you press the
without pressing the ENTER key, you can cancel the
2414B
parameter changes.
Press the TEST key.
・ The changes will be memorized and the sewing
machine will switch to home position detection
standby.
4. FUNCTION SETTINGS
key to select the memory switch
key to change the setting value.
or key (1) or the TEST key
2420B 2616B
2422B
or key
2423B
2424B
2404B
9