Brother KE-430F Service Manual page 31

Maintenance settings (700 − 799)
No. Setting range
750 ON/OFF
0 − 3000
751
(ms)
0 − 99
752
756 ON/OFF
Specification and destination settings (800 − 899)
No. Setting range
430F-03: 3, 5, K, F
430F-05: 3, 5, K, F
850
430F-0K: 3, 5, K, F
*1
430F-0F: 3, 5, K, F
438F-03: 3
*1: This is not initialized during initialization mode.
Unique settings for each model (900 − 999)
No. Setting range
OFF, 1 − 2
951
Initial
Setting units
value
Continuous operation mode (for administrator)
ON: Continuous operation is repeated while the foot switch is
OFF -
OFF: Disabled
Continuous operation cycle time adjustment timer (for
200 10 administrator)
* Enabled when No. 750 is set to "ON".
0 1 Sewing machine ID code (for specifying SD card folder)
Thread winding speed limit
ON: Upper limit is limited to 2000 sti/min.
ON -
OFF: Upper limit is not limited to 2000 sti/min.
Initial
Setting units
value
3
Specification code setting
* The 438F has only -03 specifications.
5
3: -03 specifications (medium-weight material)
K -
5: -05 specifications (heavy-weight material)
F
K: -0K specifications (knitted wear)
F: -0F specifications (foundation garments)
3
Initial
Setting units
value
Eyelet bar tack closing device (old 432 series)
OFF: Disable
OFF 1
1: Eyelet bar tacker closing device operates after the work
2: Eyelet bar tack closing device operates at the sewing start.
KE-430F, BE-438F
Setting details
being depressed to the 2nd step (for a 2-pedal foot
switch, while the start switch is being depressed).
NOTE:
This setting is for use by an administrator in test
running mode. It is dangerous to set it to "ON" for
normal sewing, so it should always be set back to
"OFF" after use.
* If the speed specified at the operation panel exceeds
2000 sti/min, thread winding will be limited to 2000
sti/min.
* Thread winding is carried out at the speed specified at
the operation panel.
Setting details
Setting details
clamp has dropped.
4. FUNCTION SETTINGS
21